Product Features & Benefits
- Order rough valve separately
- Two handle design for precise temperature control
- ADA Compliant
- Handle(s): Two Handle Lever
- With Side Sprayer: F
- With Soap/Lotion Dispenser: F
- Valve Type: Washerless stem cartridge
- Installation: 3-hole 8-16" installation
- Spout Length: 8-3/32
- Spout Total Height: 4-21/32
- Spout Height Deck to Aerator: 2-1/32
Hi There, I have Peerless PTT298696 Apex Two Handle Roman Tub Trim. I need to buy Tub Rough-in Valve. Which Model will be good - R2700 or R2707 ?
Hi, Tatjana! Thank you for your question. The PTT298696 will work with either R2707 or the R2700 valve body assembly? Best Regards, Rosanna
Date published: 2018-03-22
Hello, Product PTT298696, your website indicates 'rough in included' and then in the specs documents indicates 'rough in to be purchased' separately. what is the correction remark? Carol
Hi, CarolJ! Thank you for your question, and I do apologize for the confusion. The rough valve is not included. You will need to purchase this separately. Best Regards, Rosanna
Date published: 2018-03-21
Will the Delta rough R2700 work with this. I know delta makes Peerless, and I already have the R2700 rough valve in place.
Thank you for your inquiry, Ali Marco! As long as your Peerless current tub spout has a set screw on the back side of the spout, then yes, the PTT298696-BN will with your alread installed R2700 rough-in valve assembly. Best regards, Tanya
Date published: 2018-02-05
Can I just buy the handles of the PTT298696-BN. IF SO MAY I HAVE THE PART NUMBER
Thank you for your question, Ali! The handle assemblies are available as part number RP73113BN. http://www.peerlessfaucet.com/kitchen/product/RP73113BN Best regards, Jon
Date published: 2018-02-02
PTT298696-BN :will it be good sizing for a 20yr old T2710 :if not any ideas?
My garden tub is 20 years old (1997) with a Delta T2710 Garden Tub facet with the crystal ball handles. My guess is the faucet will fit over where the older faucet was but it looks like the round plate of the handles might be too small to fit over the existing holes where the T2710 crystal balls wre. (UNLESS YOU FEEL THEY WILL FIT) IF THEY ARE SLIGHTLY TOO SMALL Do you have any suggestions about possible slightly larger handles(circular bottoms) in Brushed nickel that will fit over the crystal balls bottoms.
Dear Alexis, Thank you for your question. The RP49320 handle bases with gaskets measure 2 7/16" (62 mm) and are the only one manufactured for the Peerless PTT298510-BN roman tub faucet. https://media.peerlessfaucet.com/PartsDiagram/PPD-B-PTT298510.pdf Best regards, Jon
Date published: 2017-12-26
will the r26065 valve work for this kit
Thank you for your question, Doug. Ther R26065 is designed for our international faucets. We recommend using the R2707 or R2700 Rough-In Valve. Best regards, Jon
Date published: 2018-01-30
Will this fit on a 3/4" valve stem or is it 1/2" inside the spout?
Hi Marie, Thank you for your question. The inside of the spout is approximately 3/4". It will fit on an R2707 rough-in valve. Best regards, Jon
Date published: 2017-06-22
Will R2700 work with this instead of R2707?
Hi Bob, Thank you for your question! You may use this trim with the R2700 rough-in valve. Best regards, Jon
Date published: 2017-06-20
1The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.