Single Handle Kitchen Faucet
P115LF is rated out of 5 by 4.
List Price*: $68.90
Product Features & Benefits
- Single lever control for ease of operation with one hand
- Spout swivels 360 degrees for added convenience
- Side sprayer for easy pot filling and clean-up around the sink
- 4-hole sink application
- Water Efficient Product meeting CALGreen standards
- Low Lead Certified
- With Side Sprayer
- ADA Compliant
- Handle(s): Single Handle Lever
- With Side Sprayer: Yes
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Valve Type: Washerless ball valve
- Installation: 4-hole 8" installation
- Spout Length: 8
- Spout Total Height: 7-1/2
- Spout Height Deck to Aerator: 5-1/8
Support, Repair Parts & Technical Specs
Maintenance & Installation Sheet
Parts & Accessories Diagram
Holes for Installation
4-hole 8" installation
Rated 1 out of 5 by Neil from Problem: Gasket does not fit the faucet I bought this faucet at Walmart on Feb-04-2016. Today Feb-07-2016 I am in the middle of installation and find a problem, the gasket does not fit the faucet. It's 6:00 AM, later this morning I plan to look for a better faucet at Lowe's, and return this one to Walmart. This faucet is a replacement for the same model I bought several years ago, one with a "lifetime" warranty. That faucet developed a crack near the aerator letting water spray everywhere. I don't know where my paperwork is for the old faucet to make a claim under the warranty.
Date published: 2016-02-07
Rated 1 out of 5 by blhktpdude from piece of junk Bought this faucet three months ago and the sprayer line detched from the faucet flooding my kitchen.
Date published: 2014-12-28
Rated 1 out of 5 by Anonymous from P115LF-W makes strange noise Purchased peerless p115lf-w single handle kitchen faucet with sprayer from a local superstore. The inner direction valve makes random strange noise and seems low quality. Wonder how long it will last.
Date published: 2014-03-18
Rated 5 out of 5 by Vic from Love this faucet! This faucet is great! But what I am really impressed with is the Peerless Company. It is a replacement for a faulty Peerless faucet I bought 3 years ago. The company replaced it with no problem. At no charge! Way to stand behind your products!!!!!
Date published: 2013-09-19
Is it OK to use Stain-Free Plumber's Putty to mount the faucet as there is a gap under the gasket which allows water to leak into cabinet?
Hello Peerless, Thank you or your inquiry! If you would like to use Plumber's putty for your faucet, it is up to you. However, we recommend Using silicone under the gasket if deck surface is rough or uneven. Please see page 3 module 3 of the below Maintenance/Installation document. https://media.peerlessfaucet.com/MandI/86582%20Rev%20B.pdf Best regards, Tanya
Date published: 2018-05-13
Should the 2 copper connectors swivel 360' ?
I changed the vavle out on my Faucet and it's still leaking and coming out of the threaded tube that is used to tighten the nut that holds the faucet in place
Date published: 2018-04-30
How do I tighten the handle?
The handle is loose and I would like to tighten it back down. If I jiggle it a little bit it pulls away from the faucet as if it is about to come off but then stops. I don't want to pull too hard and break. On other faucets I see a hole for an allan wrench to remove or tighten the faucet handle. I see no hole on this handle. Please advise.
Thank you for your question, Dan. The set screw can be accessed by prying out the red/blue button on the handle. The screw should take a 1/8" Allen wrench. Best regards, Jon
Date published: 2016-11-16
on a peerless P115LF-SS-W can I block off the sprayer Using in a RV and have only 2 sink holes
Hi Rich, Thank you for your question. You can cap off the sprayer connection on your model P115LF-SS-W faucet using the RP60295 quick plug. Thanks, Dave
Date published: 2015-05-28
How do i disconnect the quick connect hose for the sprayer?
I have this model kitchen faucet Peerless P115LF-SS
Hi Butch, Thank you for your question. To remove the hose on your model P115LF-SS you will need to press in on the textured portion on the tabs on 2 sides of the white block connector. Once you have applied pressure, push up slightly and then pull the hose down off the fittting. Thanks, Dave
Date published: 2016-12-01