Product Features & Benefits
- 2-function, pull-down sprayer for easy pot filling and clean-up around the sink
- Sleek, integrated handle design
- 1 or 3-hole sink applications using optional escutcheon
- Touch Clean
- Water Efficient Product meeting CALGreen standards
- Low Lead Certified
- Brilliance Finish
- ADA Compliant
- Handle(s): Single Handle Lever
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Pull-out/Pull-down: Yes
- Valve Type: Ceramic valve
- Installation: 1 or 3-hole 8″ installation
- Spout Length: 8
- Spout Total Height: 7
- Spout Height Deck to Aerator: 7-1/16
Rated 1 out of 5 by Billl27 from Spray head issue This faucet worked great for the first year, no its starting to not lock in one mode or the other. I get stream and shower at the same time
Date published: 2018-05-06
Rated 1 out of 5 by Chris1 from Pressure has dropped Purchased this item less than 6 months ago and having same pressure issues other noted on this sites reviews. Loved the look and pressure when first installed but now barely get any water pressure.
Date published: 2018-04-19
Rated 3 out of 5 by tklingshirn from kitchen faucet We purchased this product 4 years ago. The inside part of the sprayer (hose) water pressure is getting slow. Is there a way to clean that part or do I need to buy a brand new faucet??
Date published: 2018-02-20
Rated 2 out of 5 by Megg from Great at first but not holding up I have had this product for a little over a year and it was working great at first but the sprayer stopped working and the water pressure is down to about a quarter of what the faucet gave out when I first bought it. The sprayer no longer stays on at the click of a button. I have to hold the button down to use this feature. Which is sometimes better than the trickling water since it offers a bit more pressure for rinsing dishes. Faulty product, I’m very unsatisfied!!
Date published: 2018-02-11
Rated 3 out of 5 by Angelo from Leaking supply hose. I purchased this about a year ago to replace a Moen , and it worked fine till the supply line just behind the head started to leak in various spots. Got this from Canadian Tire for about $200.00, even the tab that changes from stream to spay is starting to decay. Should of stayed with Moen.
Date published: 2018-02-10
Rated 2 out of 5 by Fawn from Pretty but not holding up I have only had this for a year and the pull out portions magnet is no longer holding so the faucet is floppy.
Date published: 2017-11-16
Rated 3 out of 5 by Cazper from Stylish, and looks great in my kitchen. Too bad the stream function is faulty. The toggle switch from stream to spray works great but then it won't switch back to stream mode. Eventually it will go back to stream on its own. I've had the faucet for only 3 mos. I really like the style but am disappointed with the sprayer. After reading other reviews it would appear others have had a similar issue. Seems like a design or parts flaw?
Date published: 2017-11-03
Rated 3 out of 5 by amyh from sprayer not working properly I love the look of this faucet in my new house, and when it worked it was great, but its been less than 2 years and the sprayer button won't work unless I keep constant pressure on it and now it seems when I'm not engaging the sprayer, it still has mini-spray like drips coming out as well as the single normal flow. Also, when I have hot water on, it wouldn't engage the sprayer feature unless I held it on.
Date published: 2017-08-11
Is this faucet NSF 61 certified?
Hello Patrick, Thank you for your inquiry! Peerless Certifies products with a third-party certifier, CSA Group, to the ASME A112.18.1/CSA B125.1, Plumbing Supply Fittings. To be in compliance with ASME A112.18.1/CSA B125.1 Section 4.9.1 (excerpt below), the model is required to be in compliance with the applicable section of NSF 61. The product listing, to confirm compliance can be found online: http://www.csagroup.org/services/testing-and-certification/certified-product-listing Best regards, Tanya
Date published: 2018-04-10
We installed the faucet and we turned on both the hot and cold valves but the hot water doesn't come out hot. What can we do?
Thank you for your inquiry, Lupe! The Peerless Kitchen P188103LF faucet does not contain any parts that can limit the temperature of the water. You may want to check the temperature on your hot water heater and and flush the your supply valve. Best regards, Tanya
Date published: 2018-03-26
How long is the warranty on peerless pull out
Hi, Ani36. Thank you for your question! Our products have a Lifetime Limited Warrant that covers parts and finish to be free from defect in material and workmanship for as long as you own the home. Please click here for more information: http://www.peerlessfaucet.com/customer-support/warranty Best regards, Jon
Date published: 2018-03-08
Is there a way to increase water pressure? Without the sprayer, I have excellent pressure. But with it...no so much. And yes, I cleaned the filter.
Dear Pam, Thank you for your question. The Peerless Pull-Down Kitchen P188103LF faucet is designed with a 1.80 GPM at 60 PSI. There is no way of increasing or decreasing the flow rate of this faucet. Best regards, Tanya
Date published: 2017-08-01
Does this faucet move from one sink to the other and then pull down?
Hi love, Thank you for your question! The spout will swivel 360 degrees. The wand can be pulled out at any position. Best regards, Jon
Date published: 2016-07-20
The escutcheon does not fit my sink. Can I install without it, going right through the sink and then counter?
The sink sits on the counter top. The place for the escutcheon is too small length for it to fit. Can I install the faucet directly on top of the sink without the escutcheon?
Hi Brandymae, Thank you for your question. The model P188103LF-OB can be installed as a 1 or 3 hole installation. Based on the attached photo there should be sufficient room for the single hole escutcheon to be used. Thanks, Dave
Date published: 2016-01-18
I lost a part of the Faucet. where can I replace it?
Where can I buy the Cap of the Bonnet Nut of my P188103LF Pull dawn kitchen faucet?
Hi Marcella, Thank you for your question. The RP63205▲ bonnet nut and cap from the model P188103LF can be ordered from your local retailer or wholesaler that sells Peerless/Delta products. The items can also be purchased online. Here is a link to our where to buy tool. http://www.peerlessfaucet.com/where-to-buy?modelNumber=P188103LF-SS Thanks, Dave
Date published: 2016-01-18
I can't imagine why in the world would you have a 1/2" fitting on this when the actual feed line is 3/8" on this and most other faucets. Now I get to
Why a 3/8" supply line with a 1/2" fitting on the end. This makes absolutely no sense at all.
Hi Roger, Thank you for your question. The 1/2" male fitting to hook up the faucet supply line is the current industry standard. The majority of faucet supply lines sold are 1/2" female pipe thread on one and and 3/8" compression on the other end. Thanks, Dave
Date published: 2015-11-16
1The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.