Two Handle Kitchen Faucet

Model: P299501LF
LIST PRICE AS SHOWN (US $):
¹ $72.60
Finish: Chrome

Where to Buy

Email Print

Faucet Finish/Color Options

Chrome

Start a Project with this Product View Repair Parts for this Model

Product Features & Benefits
- Spout swivels 360 degrees for added convenience
- Matching side sprayer for easy pot filling and clean-up around the sink
- Two handle design for precise temperature control
- 4-hole sink application
- Lifetime Faucet and Finish Warranty
- CA/VT Compliant
- With Side Sprayer
- Water Efficient Product meeting CALGreen standards
Product Details
- Number of Handles: 2
- With Side Sprayer: Yes
- With Soap/Lotion Dispenser: No
- Tall/High-Arc: No
- Pull-out/Pull-down: No
- Valve Type: Washerless stem cartridge
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Holes/Width: 4-hole 8″ installation
- Spout Length: 9″
- Spout Total Height: 7-1/16″
- Spout Height Deck to Aerator: 5-7/8″
Product Support, Repair Parts & Technical Specifications

The following support information is available for this model:
- Maintenance & Installation Sheet
  View Download/Print
- Technical Specifications
  View Download/Print
- Parts & Accessories Diagram
  View Download/Print
Installation Information

4-hole 8″ installation
Two Handle Kitchen Faucet 5 5 1 1
I COULD NOT BE MORE PLEASED My new faucet is a warranty replacement for one that developed a blow hole in the middle of the spout. Had that model still been available I would have received a new spout. Because of a recent (I hope temporary) health issue I had the faucet professionally installed. The new one is the same design as the old one and that installation was super easy. Depending on the design, removing your old one could be a nightmare. Mine was. The knob handles and spout all move freely. There was no banging sound that is sometimes caused by air in the line. In short everything is as good as expected. If I had to complain about something, the sprayer hose had taken a set in the box and was a bit of a hassle to use. I verified it was not hung up underneath then pulled it out and ran hot water through it and tried to straighten the kinks. If I don't amend this review, assume that the problem has resolved itself over time. I am using a PUR water filter with my faucet. My installer explained that the extra weight on the spout can cause wear on the O-rings which can cause the faucet to leak at the base of the spout. When it leaks, remove the spout, roll back the O-rings, put Teflon tape on and roll the rings back in place over the tape to stop the leak. Hopefully, it will be several years before I verify that it works. April 5, 2014
1 Question : 1 Answer
Product Q&A
Ask your questions. Share your answers.

« Back

Search Q&A

All All

Has staff answer
Has expert answer

Two Handle Kitchen Faucet

1 answer
how do i get diverter valve out?
by
Jeff
Augusta, GA, USA
on Two Handle Kitchen Faucet

trying to get diverter valve out and the plastic part on top broke. Now how do I get the valve out?

Age: 25 to 34
Gender: Male
Project Type: Replacement
Ownership: 2-5 years
Skill Level: Beginner

2 months, 3 weeks ago

by
Jeff
Augusta, GA, USA
Answer this question

0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
Report inappropriate content
1I have this question too

Answers

Staff
Expert
Answer:
Hi Jeff, We are sorry that you are experiencing a problem with your faucet. If the top portion of the diverter broke off, you might try using needle nose pliers to remove the rest of the diverter assembly. The diverter is made to unscrew counter-clockwise.
Thanks,
Dave
Skill Level: Advanced

2 months, 3 weeks ago

by
Deltafaucet2

Additional information about Deltafaucet2 could not be loaded.

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Report inappropriate content

1 of 1

Policies & Guidelines
Ask a new question