Kitchen Single Handle Pull Down

  • Model: P88103LF-SSSD-L
  • LIST PRICE AS SHOWN (US $):
    1
    $256.80
  • Finish: Stainless

Faucet Finish/Color Options

Click an option below to change the product photo.

Start a Project with this Product View Repair Parts for this Model
  • Product Support, Repair Parts & Technical Specifications

    The following support information is available for this model:

    Installation Information

    2 or 4-hole 8″ installation

  • Kitchen Single Handle Pull Down 3.3 5 56 56
    Soap Dispenser not working properly Bought this in January and installed it without any issues. Lately soap dispenser stops pumping soap. Have soaked it in Hot water and still doesn't work properly. Aside from that problem, it's a great faucet! July 16, 2015
    Faucet Head Leaks The faucet looks great, but started to leak from the head after 1.5 years of use. Basically when you turn it on for a steady stream of water from the center of the head, water leaks out one of the sides. I took the head apart and realized some of the rubber seals are already worn out. I went to the lowes to see if I could replace any of the rubber seals, but you can't buy them. My only alternative is to buy a new faucet or replace the head. I don't think I'll buy another peerless faucet at this time. July 11, 2015
    SOAP PUMP STOPPED WORKING We purchased this faucet less than 3 months ago and the soap pump stopped working almost immediately. We've tried taking apart and reinstalling but unfortunately have not been able to resolve the problem. other than soap pump issue, the faucet looks and works great. July 6, 2015
    Great Quality! Amazing look for the price,easy installation, chrome looks beautiful! July 7, 2015
    Great Value This faucet looks good, works perfectly, and was reasonably priced.....a great combination of factors. The only thing I would change is that I wish the hose was longer so I could pull the faucet a little further when filling containers next to the sink. It does get the job done and works great, though. May 11, 2015
    Hot water soak fixed the soap dispenser clog. Love the faucet. I was concerned when the soap dispenser quit working, but soaking it in hot water as suggested fixed it. Thanks for the tip. May 19, 2015
    soap pump stopped working I have had this faucet for around a year and about 3 months into using it the soap pump just stopped working it was disappointing because my wife used it quite a bit. Other than that its a great faucet. May 11, 2015
    Great faucet I had it now for 3 months and It is great. I installed it myself.. Make sure you have a basin wrench. May 10, 2015
    • 2015-07-27T14:36:46.783-05:00
    • bvseo_lps, prod_bvrr, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasreviews, tv_56, tr_56
    • loc_en_US, sid_P88103LF-SSSD-L, prod, sort_default
  • 23 Questions : 23 Answers

    Product Q&A

    Ask your questions. Share your answers.

     
     
    « Back
     
     
    Has staff answer
    Has expert answer
    Kitchen Single Handle Pull Down
     
    1 answer

    Can this be installed in a one hole application?

    Age: 25 to 34
    Gender: Male
    Project Type: New
    Ownership: < 1 year
    Skill Level: Intermediate
    1 month, 4 weeks ago
    Customer avatar
    by
    Cory
    Virgina
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi Cory, Thank you for your question. The model P88103LF-SSSD-L faucet can be installed in a one hole application. The soap dispenser that comes with the faucet would not be able to be used unless a 2nd hole is added.
    Thanks,
    Dave
    Skill Level: Advanced
    1 month, 3 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Deltafaucet2 is loaded.
    Additional information about Deltafaucet2 could not be loaded.
    +1point
    1out of 1found this answer helpful.
    Was this helpful?helpful1unhelpful0
    3 weeks ago
    Customer avatar
    by
    Tom
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi Tom, Thank you for your question. Unfortunately we do not offer any type of wrench uses to tighten the mounting nut on the model P88103LF-SD-L. A basin wrench is the recommended tool to use in your type of installation.
    Thanks,
    Dave
    Skill Level: Advanced
    3 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Deltafaucet2 is loaded.
    Additional information about Deltafaucet2 could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    Has expert answer
    Kitchen Single Handle Pull Down
     
    1 answer

    Low water flow problems

    Customer avatar
    by
    Dan
    San Diego, CA, USA
    Could you provide a link to the answers for the problem mentioned about low water flow from this faucet. Thanks
    Age: 55 to 64
    Gender: Male
    Project Type: Replacement
    Ownership: < 1 year
    Skill Level: Intermediate
    2 months, 2 weeks ago
    Customer avatar
    by
    Dan
    San Diego, CA, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi Dan, Here is the answer to the previous low flow question on the model P188104LF.
    Hi Tom, Thank you for your question. It sounds like some debris may have got into the hot water line and is restricting the water flow. You will want to remove the RP63206 cartridge and make sure that it is free from debris. Also verify that the water is not restricted coming out of the hot water stop. Finally remove the wand and flush the faucet to clear out the lines.
    Thanks,
    Dave
    Skill Level: Advanced
    2 months, 2 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Deltafaucet2 is loaded.
    Additional information about Deltafaucet2 could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    Has expert answer
    Kitchen Single Handle Pull Down
     
    1 answer

    Is there a shorter bottle that goes with this product?

    Customer avatar
    by
    Angela
    Texas, USA
    The bottle it came with hits a pipe underneath our sink. WE need at least a 1in shorter bottle.
    Age: 45 to 54
    Gender: Female
    Project Type: Replacement
    Ownership: < 1 year
    Skill Level: Advanced
    1 month ago
    Customer avatar
    by
    Angela
    Texas, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi Angela,

    Thank you for your question. Peerless Faucet model # P88103LF-SD-L only has the one bottle available for the soap dispenser. I apologize for any inconvenience this causes.

    Thanks.

    Jody
    Skill Level: Advanced
    1 month ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Delta is loaded.
    Additional information about Delta could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    Has expert answer
    Kitchen Single Handle Pull Down
     
    1 answer

    Faucet Connects Don't Work

    Customer avatar
    by
    Key
    Greensboro, NC, USA
    I purchased model P88103LF-SSSD-L along with Peerless Faucet connectors. The water did not just leak it was spouting out of the top of the connector. Went and purchased two more sets of of universal faucet connectors with the same results. When I went back the last time the department store pulled down my faucet from the shelf and showed us that the peerless faucet has sort of a square end and the connectors are round. What should we do beside return the faucet for another brand?
    Age: 35 to 44
    Gender: Female
    Project Type: Replacement
    Ownership: < 1 year
    Skill Level: Beginner
    3 months, 2 weeks ago
    Customer avatar
    by
    Key
    Greensboro, NC, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi Key, Thank you for your question. The model P88103LF-SSSD-L faucet is made by Peerless Faucet, the suppply lines are not. They are made by Peerless Plumbing. Even though the shape of the supply line connection is not perfectly round a standard 1/2" faucet supply line will make the proper connection to the faucet.
    Thanks,
    Dave
    Skill Level: Advanced
    3 months, 1 week ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Deltafaucet2 is loaded.
    Additional information about Deltafaucet2 could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    Has expert answer
    Kitchen Single Handle Pull Down
     
    1 answer

    Is the hot water supposed to be when you pull down towards the sink or when you push back?

    Customer avatar
    by
    Mike
    Calvert County, MD, USA
    I've read that the shorter line is normally for the hot water supply and the cold is the longer of the two, however the longer is labeled for hot on my faucet and the hot water is turned on when you pull down towards the sink with this installation according to the labeling of the supply line and the cold water is when you push back. What is standard on this? Are my lines reversed? Should hot water come on when you push up towards the wall?
    Age: 35 to 44
    Gender: Male
    Project Type: New
    Ownership: < 1 year
    Skill Level: Intermediate
    7 months ago
    Customer avatar
    by
    Mike
    Calvert County, MD, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi Mike, Thank you for your question. The hot water should be on when the handle is pushed back. Reversing your supply lines should solve the issue.
    Thanks,
    Dave
    Skill Level: Advanced
    7 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Deltafaucet2 is loaded.
    Additional information about Deltafaucet2 could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    Has expert answer
    Kitchen Single Handle Pull Down
     
    1 answer

    hot water pressure low for MODEL P88103LF-SD-L

    Customer avatar
    by
    Tom
    Evansville, IN, USA
    all other faucets in house, both hot and cold, have the same water pressure. only this kitchen faucet has very diminished water pressure on hot water side. need advice on how to troubleshoot and repair MODEL P88103LF-SD-L
    Age: 65 or over
    Gender: Male
    Project Type: New
    Ownership: 6-10 years
    Skill Level: Intermediate
    6 months ago
    Customer avatar
    by
    Tom
    Evansville, IN, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi Tom, Thank you for your question. It sounds like some debris may have got into the hot water line and is restricting the water flow. You will want to remove the RP63206 cartridge and make sure that it is free from debris. Also verify that the water is not restricted coming out of the hot water stop. Finally remove the wand and flush the faucet to clear out the lines.
    Thanks,
    Dave
    Skill Level: Advanced
    6 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Deltafaucet2 is loaded.
    Additional information about Deltafaucet2 could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    Has expert answer
    Kitchen Single Handle Pull Down
     
    1 answer

    Faucet continues to drip for about 10-12 seconds after shut off?

    Customer avatar
    by
    Jim
    Orlando, FL, USA
    Age: 55 to 64
    Gender: Male
    Project Type: Replacement
    Ownership: < 1 year
    Skill Level: Beginner
    7 months ago
    Customer avatar
    by
    Jim
    Orlando, FL, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi Jim, Thank you for your question. On hi-arc kitchen faucets like the model P88103LF--SSSD-L the residual water that is left in the spout will drain out after the faucet is shut off. Traditional spouts are slanted back towards the valve and the water in the spout remains in the spout when the valve is closed. The arc spout/wand is pointed down so the residual water flows out.
    Thanks,
    Dave
    Skill Level: Advanced
    7 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Deltafaucet2 is loaded.
    Additional information about Deltafaucet2 could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    Has expert answer
    Kitchen Single Handle Pull Down
     
    1 answer

    seems to be leaking at the quick connect hose assembly

    so should I replace the 2 black O rings to see if that work? put some sort of grease on the O rings? If I replace the O rings, what size are they
    Age: 55 to 64
    Gender: Female
    Project Type: Replacement
    Ownership: 2-5 years
    Skill Level: Advanced
    9 months ago
    Customer avatar
    by
    Deborah
    VA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi Deborah, Thank you for your question. The block and o-rings for the model P88103LF-SSSD-L are available as RP60121.
    http://www.deltafaucet.com/repairpa...
    Thanks,
    Dave
    Skill Level: Advanced
    9 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Deltafaucet2 is loaded.
    Additional information about Deltafaucet2 could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    Has expert answer
    Kitchen Single Handle Pull Down
     
    1 answer

    hose assembly retracting

    Customer avatar
    by
    just4trix
    new jersey
    The hose assembly will not fully retract anymore
    Do I have to replace or us there a fix?
    Age: 45 to 54
    Gender: Female
    Project Type: New
    Ownership: 2-5 years
    Skill Level: Beginner
    9 months ago
    Customer avatar
    by
    just4trix
    new jersey
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Hi just4trix, Thank you for your question. Please verify that the weight is properly positioned and that nothing is blocking, or catching on the hose assembly as the wand is replaced in the faucet.
    Thanks,
    Dave
    Skill Level: Advanced
    8 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about Deltafaucet2 is loaded.
    Additional information about Deltafaucet2 could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    • 2015-07-27T14:36:58.423-05:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_P88103LF-SSSD-L, prod, sort_default
    2 next>>
    • 2015-07-27T14:36:58.428-05:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_P88103LF-SSSD-L, prod, sort_default

1The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.