CLAYMORE™
Two Handle Bathroom Faucet
Model:P299696LF
Product Features & Benefits
- WaterSense certification promotes water conservation
- Includes matching finish drain assembly
- Meets standards set by Americans with Disabilities Act (ADA)
- 3-hole 4 in. installation
- Water Efficient Product meeting CALGreen standards
- Low Lead Certified
- WaterSense Labeled
- ADA Compliant
Product Details
- Handle(s): Two Handle Lever
- Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
- Valve Type: Washerless stem cartridge
- Installation: 3-hole 4" installation
- Spout Length: 3-7/8
- Spout Total Height: 5-15/16
- Spout Height Deck to Aerator: 4-7/32
Support, Repair Parts & Technical Specs
Maintenance & Installation Sheet
Technical Specifications
Parts & Accessories Diagram
Holes for Installation
3-hole 4" installation
I have a slow drip from the spout. What can I do to stop it.
I have narrowed it down to the Hot water side. I have noticed a small white deposit at the bottom of the valve section. All of the "O" rings seem to be in good shape.
Hi Rolla,
Thank you for your question. To stop a faucet leak from the spout you will want to place the stem unit assembly, seats, and springs. The repair kit for the model P299696LF is available as RP54801.
Thanks,
Dave
Date published: 2017-06-08
How do u reassemble the aerator
Hi Kurt, Thank you for your question. Please see the picture below showing the assembly order of the internal aerator components.
Thanks,
Dave
Date published: 2018-09-03
The "H" button, designating the hot handle, has fallen out and will not stay in place. Can I buy just an "H" button to replace it?
The fingers to hold the "H" button in place have broken off and will not longer keep it in place.
Hi Will, Thank you for your question. Unfortunately the "H" button to the model P299696LF is not available as a separate item. It can only be ordered as part of the RP70196 handle kit.
Thanks,
Dave
Date published: 2015-07-16
the rod that the push rod is connected to(that goes into the drain pipe) has rusted off and therefore the popup drain does not work.
Hi Phil, Thank you for your question. The horizontal rod to the pop up drain assembly on your model P299696LF faucet is available to order as RP12517.
http://www.deltafaucet.com/repairparts/details/rp12517.html?showPhotoGallery=false
Thanks,
Dave
Date published: 2015-02-27
Name of the Faucet
I am trying to match accessories to this P299696LF-BN faucet but I cannot find a name for this collection. You cannot find accessories with this number. Any help will be appreciated. I looked at Home Depot and found a few, with names, that resemble this one but I want to be sure before I buy.
Hi Firegal2539, Thank you for your question. The model P299696LF is part of the Apex line. The faucet will coordinate with the Foundations, Windemere, and Classic accessories.
Thanks,
Dave
Date published: 2015-02-13
In the chrome version, are the buttons and aerator brass finished?
We purchased this same model at Lowes several years ago, and the buttons (end of handles, H and C buttons, and the top of the drain pull) are brass finished. Does Peerless still offer that option? And if so, where can I purchase four of these faucets for our remodeled bathrooms?
Hi Tony, Thank you for your question. We no longer offer the chrome/polished brass(CB) combination finish. The model P299696LF will be a complete chrome finish.
Thanks,
Dave
Date published: 2014-05-05
I am trying to repace the seat and spring on the hot water side. I cannot remove the handle. How do I get it off?
Hi Bob, Thank you for your question. The screws for the handles on your model P299696LF faucet will be found underneath the hot and cold buttons on top of the handles. You will need to pry off the buttons to gain access to the screws. I have attached a link to the parts breakdown of your faucet model below to show you how the handles are attached.
Thanks,
Dave
http://www.peerlessfaucet.com/customer-support/find-repair-parts/documentation/p299696lf.html?document=pd&documentIndex=0
Date published: 2014-01-14
how do i remove one of the handles to replace the seat and spring? There is an "H' for 'hot' on top, no place to unscrew it. How do i get it apart?
Hi Bob, Thank you for your question. The screws for the handles on your model P299696LF faucet will be found underneath the hot and cold buttons on top of the handles. You will need to pry off the buttons to gain access to the screws. I have attached a link to the parts breakdown of your faucet model below to show you how the handles are attached.
Thanks,
Dave
http://www.peerlessfaucet.com/customer-support/find-repair-parts/documentation/p299696lf.html?document=pd&documentIndex=0
Date published: 2014-01-14