PEERLESS
Two Handle Widespread Bathroom Faucet
Model:P99140LF-PB
only at Lowe's
Product Features & Benefits
- 3-hole 6-16" installation
- Plastic pop-up
- ADA Compliant
- Water Efficient Product meeting CALGreen standards
- Low Lead Certified
- Brilliance Finish
- WaterSense Labeled
- ADA Compliant
Product Details
- Handle(s): Two Handle Lever
- Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
- Valve Type: Washerless stem cartridge
- Installation: 3-hole 6-16" installation
- Spout Length: 5
- Spout Total Height: 3-1/8
- Spout Height Deck to Aerator: 2-3/4
Support, Repair Parts & Technical Specs
Maintenance & Installation Sheet
Technical Specifications
Parts & Accessories Diagram
Holes for Installation
3-hole 6-16" installation
How can I remove the filter? Our water tends to have particulate matter that clogs up faucets, so I need to remove the filter for cleaning.
Hello Alice,
Thank you for your question! You may remove the aerator using the included wrench tool. Please refer to page 4 of the Installation Instructions for help with this:
https://media.peerlessfaucet.com/MandI/88783%20Rev%20A.pdf
Best regards, Jon
Date published: 2018-08-24
What cleaning products do you use on the polished brass as some cause damage to brass?
Hi Ron B,
Thank you for you question. Normally, we recommend to always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward.
http://www.peerlessfaucet.com/customer-support/faqs/cleaning-and-care#how-should-i-clean-or-maintain-the-finish-on-my-faucet
Best regards,
Tanya
Date published: 2018-06-23
Is there a shank extender or thick deck mounting kit available for this faucet? My deck is 1 3/4 inches thick. Tile on concrete on plywood.
Hello KenE,
Thank you for your inquiry! Unfortunately, Peerless does not manufacture any shank extenders or thick deck mounting kits for any of our lavatory faucets. The Delta Lavatory P99140LF-PB faucet requires 1 1/8" (29 mm) maximum deck thickness.
https://media.peerlessfaucet.com/SpecSheet/PSP-L-P99140LF%20Rev%20A.pdf
Best regards,
Tanya
Date published: 2018-05-02
the flow rate is to low can i get a flow rate higher than 1.20 gpm
Hello Kpgabcd,
Thank you for inquiry! The Peerless Lavatory P99140LF-PB faucet is designed with only a 1.20 GPM at 60 PSI. We do not manufacture an aerator with a higher flow rate.
Best regards,
Tanya
Date published: 2018-03-10
How to change the screen?
Hello Fed,
Thank you for your inquiry! The Peerless Lavatory P99140LF-PB faucet comes with a special wrench (RP51345-1.2) for removing the aerator for cleaning.
https://media.peerlessfaucet.com/PartsDiagram/PPD-L-P99140LF.pdf
Best regards,
Tanya
Date published: 2018-02-06
How do I care for this faucet? Cleaning products to use?
Dear Joan,
Thank you for you question. Normally, we recommend to always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward.
http://www.peerlessfaucet.com/customer-support/faqs/cleaning-and-care#how-should-i-clean-or-maintain-the-finish-on-my-faucet
Best regards,
Tanya
Date published: 2017-11-12