PEERLESS
Single Handle Kitchen Pull-Down with Soap Dispenser
Model:P188102LF-SSSD
Product Features & Benefits
- Single lever control for ease of operation with one hand
- 2-function, pull-down sprayer for easy pot filling and clean-up around the sink
- Matching soap dispenser for added convenience
- 3-hole sink application
- Water Efficient Product meeting CALGreen standards
- Low Lead Certified
- Brilliance Finish
- Soap Dispenser
- ADA Compliant
Product Details
- Handle(s): Single Handle Lever
- With Soap/Lotion Dispenser: Yes
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Pull-out/Pull-down: Yes
- Valve Type: Washerless ball valve
- Installation: 3-hole 6-16" installation
- Spout Length: 8
- Spout Total Height: 13-3/16
- Spout Height Deck to Aerator: 7-1/16
Support, Repair Parts & Technical Specs
Maintenance & Installation Sheet
Technical Specifications
Parts & Accessories Diagram
Holes for Installation
3-hole 6-16" installation
is there a part number for the faucet/sprayer only? How do I get this part only?
Thank you for your question, Cecilio. The wand and hose are sold as an assembly, part number RP50447.
https://www.peerlessfaucet.com/kitchen/product/RP50447
Best regards, Jon
Date published: 2018-11-13
For Peerless P188102LF-SD Need small coupler adapter and fitting to attach garden hose to faucet. Must be about 13/16" (20mm) inside thread. Thanks for your help
Hello Desi,
Thank you for your question. None of the Peerless pull outs or pull downs faucets are compatible with adapters, filters, garden hoses and/or portable dishwashers. The connection puts too much stress on the hose, the wand and it's mounting.
Best regards,
Tanya
Date published: 2018-08-26
Is their a way to remove the part of this faucet that restricts the water flow so I can have a normal water flow?
Hello Marvel,
Thank you for your inquiry! The Peerless Kitchen Pull-Down P188102LF-SSSD faucet is designed with a flow rate of 1.80 GPM at 60 PSI. There is no way of increasing or decreasing the flow rate of this faucet.
Best regards,
Tanya
Date published: 2018-06-23
soap dispenser for p188102lf-ssd
I want a soap dispenser for this faucet - pls advise part#
Thank you for your question, Deb! The soap dispenser that is included with this model is part number RP70710.
http://www.peerlessfaucet.com/kitchen/product/RP70710SS
Best regards,
Jon
Date published: 2018-01-12
How does a water saver faucet work?
Realtor at a home inspection . Wondering how water saver faucet works
Hi Tony,
Thank you for your question. The flow rate is restricted to 1.8 gallons per minute, making it a Water Efficient Product.
Best regards,
Jon
Date published: 2016-06-16
I am trying to remove the handle. I removed the set screw, but still won't budge
Hi Vic, Thank you for your question. Once the set screw is removed there is nothing mechanical holding the handle onto the cartridge. Often mineral build up can make a handle harder to remove. We recommend soaking a towel/rag in a 50/50 solution of vinegar and water and wrapping thetowel around the handle set screw opening. Allow to solution to soak in overnight if possible to help break up the build up. This should make the handle easier to remove.
Thanks,
Dave
Date published: 2016-02-11
WHAT IS THE BEST/EASIEST WAY TO REMOVE THE AERATOR FROM THE FAUCET?
Hi Flip, Thank you for your question. The aerator on the wand for the model P188102LF-SD can be removed with an adjustable wrench. The aerator has 2 flat areas on the side of the housing that will accept a wrench. Simply unscrew the aerator in a counter-clockwise direction.
Thanks,
Dave
Date published: 2015-10-22
missing plate and installation question
I bought this product "as it is" with missing plate noted. Can I install it without plate or where I can purchase a plate for it? Can it fit into a four hole sink? (picture is attached). Thanks.
Hi Maomao, Thank you for your question. The model P88102-SSSD is made for a 3 hole installation with each component, spout, valve, and soap dispenser mounting in a single hole. The model does not have an escutcheon plate available. You can mount it in a 4 hole sink and cap off the 4th hole or add another accessory.
Thanks,
Dave
Date published: 2014-05-19