Product Features & Benefits
- 2-function, pull-down sprayer for easy pot filling and clean-up around the sink
- Sleek, integrated handle design
- 1 or 3-hole sink applications using optional escutcheon
- Touch Clean
- Water Efficient Product meeting CALGreen standards
- ADA Compliant
- Handle(s): Single Handle Lever
- With Side Sprayer: F
- With Soap/Lotion Dispenser: F
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Pull-out/Pull-down: Yes
- Valve Type: Ceramic valve
- Installation: 1 or 3-hole 8″ installation
- Spout Length: 8
- Spout Total Height: 7
- Spout Height Deck to Aerator: 7-1/16
Rated 3 out of 5 by tklingshirn from kitchen faucet We purchased this product 4 years ago. The inside part of the sprayer (hose) water pressure is getting slow. Is there a way to clean that part or do I need to buy a brand new faucet??
Date published: 2018-02-20
Rated 2 out of 5 by Megg from Great at first but not holding up I have had this product for a little over a year and it was working great at first but the sprayer stopped working and the water pressure is down to about a quarter of what the faucet gave out when I first bought it. The sprayer no longer stays on at the click of a button. I have to hold the button down to use this feature. Which is sometimes better than the trickling water since it offers a bit more pressure for rinsing dishes. Faulty product, I’m very unsatisfied!!
Date published: 2018-02-11
Rated 3 out of 5 by Angelo from Leaking supply hose. I purchased this about a year ago to replace a Moen , and it worked fine till the supply line just behind the head started to leak in various spots. Got this from Canadian Tire for about $200.00, even the tab that changes from stream to spay is starting to decay. Should of stayed with Moen.
Date published: 2018-02-10
Rated 2 out of 5 by Fawn from Pretty but not holding up I have only had this for a year and the pull out portions magnet is no longer holding so the faucet is floppy.
Date published: 2017-11-16
Rated 3 out of 5 by Cazper from Stylish, and looks great in my kitchen. Too bad the stream function is faulty. The toggle switch from stream to spray works great but then it won't switch back to stream mode. Eventually it will go back to stream on its own. I've had the faucet for only 3 mos. I really like the style but am disappointed with the sprayer. After reading other reviews it would appear others have had a similar issue. Seems like a design or parts flaw?
Date published: 2017-11-03
Rated 3 out of 5 by amyh from sprayer not working properly I love the look of this faucet in my new house, and when it worked it was great, but its been less than 2 years and the sprayer button won't work unless I keep constant pressure on it and now it seems when I'm not engaging the sprayer, it still has mini-spray like drips coming out as well as the single normal flow. Also, when I have hot water on, it wouldn't engage the sprayer feature unless I held it on.
Date published: 2017-08-11
Rated 2 out of 5 by Anonymous from Water pressure issues Installed faucet after remodeling my kicthen, after about two months the water pressure has decreased to almost nothing . I have cleaned it ,disassembled and reassembled it and still no water pressure. Very frustrating
Date published: 2017-06-29
Rated 3 out of 5 by FrankOb from Problem with faucet sprayer I bought this faucet a month ago and I had a problem wiith the faucet spayer very soon after. The sprayer have 2 modes and when I press behind the sprayer for the spray mode, I can't get it back the the normal mode. Sometimes after I tried to shut it off and on many time and pressing in the back, it will come back to the normal mode. The spay mode is usefull but not all the time. Otherwise I'm happy about this faucet
Date published: 2017-06-25
How long is the warranty on peerless pull out
Hi, Ani36. Thank you for your question! Our products have a Lifetime Limited Warrant that covers parts and finish to be free from defect in material and workmanship for as long as you own the home. Please click here for more information: http://www.peerlessfaucet.com/customer-support/warranty Best regards, Jon
Date published: 2018-03-08
Is there a way to increase water pressure? Without the sprayer, I have excellent pressure. But with it...no so much. And yes, I cleaned the filter.
Dear Pam, Thank you for your question. The Peerless Pull-Down Kitchen P188103LF faucet is designed with a 1.80 GPM at 60 PSI. There is no way of increasing or decreasing the flow rate of this faucet. Best regards, Tanya
Date published: 2017-08-01
Does this faucet move from one sink to the other and then pull down?
Hi love, Thank you for your question! The spout will swivel 360 degrees. The wand can be pulled out at any position. Best regards, Jon
Date published: 2016-07-20
The escutcheon does not fit my sink. Can I install without it, going right through the sink and then counter?
The sink sits on the counter top. The place for the escutcheon is too small length for it to fit. Can I install the faucet directly on top of the sink without the escutcheon?
Hi Brandymae, Thank you for your question. The model P188103LF-OB can be installed as a 1 or 3 hole installation. Based on the attached photo there should be sufficient room for the single hole escutcheon to be used. Thanks, Dave
Date published: 2016-01-18
I lost a part of the Faucet. where can I replace it?
Where can I buy the Cap of the Bonnet Nut of my P188103LF Pull dawn kitchen faucet?
Hi Marcella, Thank you for your question. The RP63205▲ bonnet nut and cap from the model P188103LF can be ordered from your local retailer or wholesaler that sells Peerless/Delta products. The items can also be purchased online. Here is a link to our where to buy tool. http://www.peerlessfaucet.com/where-to-buy?modelNumber=P188103LF-SS Thanks, Dave
Date published: 2016-01-18
I can't imagine why in the world would you have a 1/2" fitting on this when the actual feed line is 3/8" on this and most other faucets. Now I get to
Why a 3/8" supply line with a 1/2" fitting on the end. This makes absolutely no sense at all.
Hi Roger, Thank you for your question. The 1/2" male fitting to hook up the faucet supply line is the current industry standard. The majority of faucet supply lines sold are 1/2" female pipe thread on one and and 3/8" compression on the other end. Thanks, Dave
Date published: 2015-11-16
faucet will not stay in place when swivelled.
My faucet will not stay in place when I swivel it to the other sink . It swings back - very frustrating. What can I do or how do I adjust to fix this problem? Thanks you in advance , Mary
Hi Mary, We are sorry that you are experiencing a problem with your model P188103LF faucet. It sounds like the pull out wand hose may be twisted or catching on something under the sink that does not allow the faucet to stay in place. Please verify that nothing is interfering with the movement. You may have to disconnect the hose under the sink to remove any twists. Thanks, Dave
Date published: 2017-05-06
Spray nozzle won't stay "in" the faucet
Is there a replacement grommet of some sort so that the nozzle will stay connected to the faucet arch??
Hi Paulette, Thank you for your question. Unfortunately the bushing/grommet in the end of the spout that holds the wand assembly in place is not available as a separate item. If you need warranty parts assistance please call our toll free Helpline at 1-800-643-8667. Thanks, Dave
Date published: 2015-05-04
1The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.