Product Features & Benefits
- Single lever control for ease of operation with one hand
- Pull-down wand operates in an aerated or spray mode via swivel spray face.
- Matching soap dispenser for added convenience
- Escutcheon plate included for four hole mounting
- Soap Dispenser
- ADA Compliant
- Handle(s): Single Handle Lever
- With Side Sprayer: F
- With Soap/Lotion Dispenser: T
- Flow Rate: 2.20 gpm @ 60 psi, 8.3 L/min @ 414 kPa
- Pull-out/Pull-down: Yes
- Valve Type: Ceramic valve
- Spout Length: 8
- Spout Total Height: 15-1/2
- Spout Height Deck to Aerator: 8
Rated 2 out of 5 by Kurt Flock from Not so much I bought 18 of these to install in kitchens I was renovating in a small apt property. So far I've had two of the pull down faucet/spray heads break during normal use by tenants. In each case the plastic connector failed. It wasn't until researching my photo files that I found a picture of the boxes they came in, AFTER I replaced them with other brands. I couldn't locate my Menard's receipts. I don't know if repair parts are available or not. I kept the most recent one that failed hoping I could find a solution.
Date published: 2018-02-04
Rated 2 out of 5 by Ang18 from Sprayer assembly broke under normal use Wish I would’ve seen the reviews before purchase. I too have had the sprayer assembly break off after a short time of use. The plastic design just doesn't hold up at all, very disappointed.
Date published: 2018-01-07
Rated 2 out of 5 by Bus60 from Cheap design Sprayer head has plastic inside. Broke off in the first few months of use.
Date published: 2017-10-28
Rated 3 out of 5 by Tony1972 from Poor design the sprayer broke off within a year Only had this faucet about a year and the sprayer has broken, cannot find a new sprayer, and am not happy about having to replace a faucet. Beautiful faucet until it broke off. Can I get/buy a replacement sprayer to fix this faucet?? SOS HELP!!
Date published: 2017-06-27
Rated 1 out of 5 by Lobobonobo from Poor design, critical failure mode built into the nozzle head! Like the other reviewers, the nozzle fell off today due to the plastic insert inside the nozzle head itself! Poor design as this is the weak point which must be twisted in order to switch from spray to the normal aerator setting and back. In service for about a year and a half in a residential setting. By replacing the nozzle head assembly (plastic), this will only happen again in the future. I have included some pictures!
Date published: 2017-06-14
Rated 1 out of 5 by Carson from One of the worst Faucets I've had the displeasure of having to deal with. - Wand broke off within months of moving into my current rental that had one newly installed. - Threads in the wand hose don't match anything that I was able to find to at least but a new Aerator on the end since the rental company wouldn't replace it, much less my water filter. - The tech specs and other diagrams here on the site don't even have the thread information listed for replacement aerators and such. - Threads also don't match any adapters I can find for my portable dishwasher. - Took it apart so I could take the hose with me to the hardware stores in my area to confirm that nothing fit, there is a catch in the tube that makes it near impossible to get the hose back through the assembly (took nearly 30 minutes of wrangling it to get it past whatever is inside that was in the way.
Date published: 2017-04-29
Rated 2 out of 5 by Steve from Broken sprayer I too suffered the fate of the broken sprayer- I believe the same plastic piece that others have talked about was the culprit with ours. Interested in replacing head rather than entire faucet.
Date published: 2017-03-08
Rated 1 out of 5 by Sma350 from Looks awesome... Cheap construction sprayer breaks! Looks great simple and modern. Like everyone else on the list, the sprayer head on the wand broke off in under 12 months.
Date published: 2016-05-29
Is there an adapter available to accommodate a Portable Dishwasher?
I have a portable dishwasher that hooks up to my old Moen faucet. I would like to buy the above faucet for my new counter and sink. By removing the spray head it could accommodate my dishwasher if I had a part that would fit in it's place or an adapter for the part I currently use. From what I saw in the store, it would need pipe threads to fit the new faucet and machine threads to attach to the old fitting.
Having done so myself, I can say that there are not backpressure issues as suggested by the manufacturer. It is a 1/2" pipe thread. To convert that to a facet thread, you will have to go from the 1/2" to 3/4"GHT (Garden Hose). From there (1/2" Male to 3/4" GHT Female) I was able to go 3/4" GHT Male to 55/64" Female Inside 15/16" Male Outside, then using a 55/64" Male-Male Coupler to my 55/64" Female Inside 15/16" Male Outside Quick Attach Snap On Aerator that attaches to my portable dishwasher. You will want to screw it all together using wrenches and pliers to avoid drips. I have found that the Quick Attach adapter for my portable can come off the end and be put back on by hand easily so I can swap in my water filter whenever I want and that finger tight is enough to not get drips between that and the coupler.
Date published: 2017-10-28
can i turn it around so the handle is on the left?
Hi JK, Thank you for your question. The spout on the model P188104LF-SD rotates a full 360 degrees. The faucet can be installed with the handle on the left. Thanks, Dave
Date published: 2016-02-04
Is it possible to change the stream/spray option so the default is spray?
Loving my new Peerless faucet so far, particularly the ability to switch - with the press of a button - the faucet head to a shower-type spray rather than the default single stream. Thing is, the spray is more convenient for almost all uses. Is it possible to change the default to spray?
Hi Gary, Thank you for your question. The wand on the model P188104LF-SD does not have a default stream/spray setting. The faucet will remain in whatever spray setting is chosen when the faucet is turned off and back on again.If you leave the wand in the spray setting it will remain there until changed. Thanks, Dave
Date published: 2015-09-21
How do you tighten the swivel neck?
The neck that the pull down head seats in rocks back and forth in the base. Is there any way to tighten it.
Hi Pitties4, Thank you for your question. There is no adjustment to make the spout tighter but we recommend that you verify that the spout bonnet is tightened down completely. Thanks, Dave
Date published: 2015-05-11
Can I get another matching soap dispenser with this faucet? Can I buy it separately?
Hi Susan, Thank you for your question. The soap dispenser to the model P188104LF-SSSD is available to order separately as RP49302SS. This item can be ordered online or from your local retailer or wholesaler that sells Peerless/Delta products. http://www.deltafaucet.com/repairparts/details/rp49302ss.html?showPhotoGallery=false Thanks, Dave
Date published: 2015-04-13
Does this faucet have flexible supply lines or copper lines?
Hi Deppzone, Thank you for your question. The model P188104LF-SSSD has copper supply lines that end with a 1/2" male pipe fitting. Thanks, Dave
Date published: 2015-02-20
I need to get a replacement part, the black threaded nylon nozzle in the head
Have looked threw this site trying to find the part described above , and just keep getting directed to the same unhelpful areas , this site is labeled parts and repair but thats not here , I need to get this part that broke, going to help or redirect me again to something that does not apply, the threaded black nylon nozzle assy it broke in two pieces
Hi Cabbage, Thank you for your question. The wand assembly for the model P188104LF-SSSD does not break down into smaller components that are available as separate items. If the black threaded portion of the wand is damaged the entire RP71265SS will need to be replaced. If you are the original purchaser of the faucet and need warranty parts assistance please call our toll free Helpline at 1-800-643-8667. Thanks, Dave
Date published: 2018-01-05
Is there any plastic in the faucet assy, other than the flexible connections? Is there plastic in the soap pumper?
Hi Sopovada, Thank you for your question. The wand assembly and the soap dispenser are the non-metallic components on the model P188104LF-SSSD faucet. Thanks, Dave
Date published: 2014-05-09
1The manufacturer's list price (U.S. dollars) is shown for comparison only. The actual retail price may be different from the price shown.