PEERLESS
Kitchen Single Handle Pull-Down Faucet
Model:P88103LF-SD-L
only at Lowe's
Product Features & Benefits
- CA/VT Compliant
- High-Arc spout provides a large working area
- Pull-down spout for washing or cleaning up
- Matching soap or lotion dispenser included
- Water Efficient Product meeting CALGreen standards
- Soap Dispenser
- ADA Compliant
Product Details
- Handle(s): Single Handle Lever
- With Soap/Lotion Dispenser: Yes
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Pull-out/Pull-down: Yes
- Valve Type: Washerless ball valve
- Installation: 2 or 4-hole 8" installation
- Spout Total Height: 16-1/32
Support, Repair Parts & Technical Specs
Maintenance & Installation Sheet
Technical Specifications
Parts & Accessories Diagram
Holes for Installation
2 or 4-hole 8" installation
Rated 5 out of
5
by
Reak from
Looks and works great!
Bought this to replace a Moen leaky faucet..... glad I went with Peerless, it works and looks great!
Date published: 2019-05-16
Rated 5 out of
5
by
Ptownproud from
Beautiful faucet
Got this faucet to replace a very old one and I am very impressed with it. My only complaint is that now I need to remodel my kitchen to match its good looks!
Date published: 2019-05-09
Rated 2 out of
5
by
SeaEric from
Not great
Like many other reviewers, the water flow gradually has decreased over the few months we have had this faucet. We thought that perhaps some small debris had clogged the spray head so we removed it to rinse it out. We must have inadvertently lost an aerator out of the end of it as the water now sprays out in two erratic streams and splashes everywhere. The hose also doesn't seem to want to retract all the way in. You have to fiddle with it and finally it gets back into place. In looking under the sink at the weight and it's placement on the hose, I did realize that the hose was kinking almost in half at the bottom where it makes the bend to go back upward. That would seem to have an effect on water flow! That hose seems cheap and poorly sourced for what it's supposed to do. Today I'm headed to the hardware store to try to find a replacement aerator screen that will fit in the end of this faucet.
Date published: 2019-05-04
Rated 5 out of
5
by
stevoh from
Great Replacement
My old faucet blew a hose and sprayed water everywhere under the sin. It was a cheapo faucet from China. It was only 2 years old and the steel braided hose burst. Never saw anything like it. Had to go Lowes next morning and got this because of price and looks.
Date published: 2019-04-27
Rated 3 out of
5
by
Guss623 from
Not too bad!
I had a friend purchase and install this faucet for me. The two complaints that I have are, the soap dispenser does not lock into place. If you were to pull a dish out of the sink and bump it by accident, the entire pump would fly out. The other thing is that the hose that comes out to spray, is entirely too short. I think that there is plenty of room under most sinks to have crafted this with a longer hose.
Date published: 2019-04-27
Rated 5 out of
5
by
reslparks from
Nice design
Seemed to be the right faucet to meet our needs with our new sink and countertop.
Date published: 2019-04-26
Rated 5 out of
5
by
Alix from
Very neat well designed.
Selected this design previous home performed for number years without any problems. Installation easy fit well with small amount space between sink and window sill.
Date published: 2019-04-07
Rated 5 out of
5
by
jnice814 from
Love my new faucet! Great Value and sleek look
I am enjoying my faucet thus far. Sleek, modern design for the right price!
Date published: 2019-03-20
Does the spray toggle lock or only work when depressed
Dear Gorak,
Thank you for your question. The toggle switch on the wand assembly of the Peerless Kitchen Pull-Down P88103LF-SD-L faucet, stay in one function (spray or stream) until the other is selected. Holding the button while in use, is not needed.
Best regards,
Tanya
Date published: 2018-01-14
installing with handle on the left side of the faucet
can this faucet be installed with the handle on the left side rather than the right as shown in the pictures
Yes, however I recommend you pass on a Peerless product.
Date published: 2017-11-18
Does soap bottle come with faucet,and how do I connect it
Yes it comes with the soap dispenser. It is installed in one of the holes in the sink. Instructions are included.
Date published: 2017-09-09
Is the hot water supposed to be when you pull down towards the sink or when you push back?
I've read that the shorter line is normally for the hot water supply and the cold is the longer of the two, however the longer is labeled for hot on my faucet and the hot water is turned on when you pull down towards the sink with this installation according to the labeling of the supply line and the cold water is when you push back. What is standard on this? Are my lines reversed? Should hot water come on when you push up towards the wall?
On our unit... pushing back towards the wall activates hot water, and pulling forward is cold water. Hope that helps.
Date published: 2017-06-10
How do I remove the quick connect hose assembly?
Thank you for your question, Jan. To remove the hose, squeeze the tabs on the white clip, push up, then pull down.
Best regards,
Jon
Date published: 2019-01-13
how do you remove faucet handle to put thread cover back on. It has fallen inside the handle after a few days of use.
Thank you for your question, Tim. There is a set screw on the bottom of the handle that takes an 1/8" Allen wrench. Simply loosen the set screw, then slide the handle off.
Best regards,
Jon
Date published: 2016-11-23
How can I clean sediment/minerals from spray head?
The aerator does not seem to separate from the valve
look closely at the center circle with the screen in it. The outer ring has 2 flat edges about a quarter inch or so long. you can use pliers or a wrench to come at it head on (tips of the pliers/wrench) to unscrew it for removal/cleaning. the aerator will separate into about 3 pieces. you may need to use a knife or something small to separate the screen head from the aerator/filer by poking it through one of the side slots to push the filter cartridge up.
Date published: 2019-01-13
Reinforcing faucet stability on thin stainless sink
Love this faucet - it looks and works great with plenty of pressure and impressive hose dexterity. We have it mounted on a mediocre-grade stainless steel sink. The sink's back deck flexes forward a bit when I pull out the sprayhead, even with the escutcheon plate and everything tightened. Any recommendation for a stabilizing plate or other reinforcing device, or should I just try to fabricate something? (Figured maybe a strip of 3/4" or 7/8" plywood with three holes through.) Thanks.
Hi Tim, Thank you for your question. We offer the RP37490 stabilization/thin sink aid to help support the faucet when mounted on a thinner sink. This plate should help with your issue.
http://www.deltafaucet.com/repairparts/details/rp37490.html
Thanks,
Dave
Date published: 2016-03-22