PEERLESS
Kitchen Single Handle Pull-Down Faucet
Model:P88103LF-SSSD-L
only at Lowe's
Product Features & Benefits
- CA/VT Compliant
- The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
- Pull-down spout for washing or cleaning up
- Matching soap or lotion dispenser included
- Brilliance Finish
- Soap Dispenser
- ADA Compliant
Product Details
- Handle(s): Single Handle Lever
- With Soap/Lotion Dispenser: Yes
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Pull-out/Pull-down: Yes
- Valve Type: Washerless ball valve
- Installation: 2 or 4-hole 8" installation
- Spout Total Height: 16-1/32
Support, Repair Parts & Technical Specs
Maintenance & Installation Sheet
Technical Specifications
Parts & Accessories Diagram
Holes for Installation
2 or 4-hole 8" installation
Rated 5 out of
5
by
DoorDonot from
The way it look, ease of use.
Brought faucet to replace a competitors, excellent choice, excellent design.
Date published: 2019-09-08
Rated 5 out of
5
by
Gus594 from
Had for about a month now great faucet for a great
Great product for a great price my wife loves
it.
Date published: 2019-07-28
Rated 4 out of
5
by
Greg 12 from
Nice look
Bought this because of looks and company history, not very happy with it faucet drips ever now and then. Can't afford plumber to charge again to fix what should have been done the first time.
Date published: 2019-07-26
Rated 4 out of
5
by
Sunny1 from
Love my faucet
Love our new home but did not like the kitchen faucet! Not high enough. Only 3 years old, much to our surprise, the faucet fell apart. Love our new Peerless - nice height and works great!
Date published: 2019-07-25
Rated 4 out of
5
by
Elpoki from
Great look and operation
I purchased two weeks ago and it looks great. Easy to use and the height is what we really needed to get those pots and pans underneath. I just don't like the dish soap dispenser being so loose and it swivels too much. Having to correct its direction every time you need soap is kind of annoying at this point.
Date published: 2019-07-13
Rated 4 out of
5
by
Njb201 from
Perfect fit
Had to purchase a new faucet that would cover the holes from the existing and it was a perfect cover! Soap dispenser holds a good amount of soap so I don't have to constantly replace it and the additional spray feature is a huge improvement from my old faucet!
Date published: 2019-07-08
Rated 4 out of
5
by
Randall from
Good price for a pull down type faucet.
Easy install and a good price for a pull down type faucet. The finish matches my steel sink also. Would like to have a magnet dock for the pull down sprayer but I guess that's reserved for more expensive models.
This model performs just as the ones twice as expensive. Good value for what I paid.
Date published: 2019-05-30
Rated 5 out of
5
by
Ellioso from
Nice features
My wife is very happy with the functionality of the faucet. (I got points.)
Date published: 2019-05-26
Does the spray toggle lock or only work when depressed
Dear Gorak,
Thank you for your question. The toggle switch on the wand assembly of the Peerless Kitchen Pull-Down P88103LF-SD-L faucet, stay in one function (spray or stream) until the other is selected. Holding the button while in use, is not needed.
Best regards,
Tanya
Date published: 2018-01-14
installing with handle on the left side of the faucet
can this faucet be installed with the handle on the left side rather than the right as shown in the pictures
Yes, however I recommend you pass on a Peerless product.
Date published: 2017-11-18
Does soap bottle come with faucet,and how do I connect it
Yes it comes with the soap dispenser. It is installed in one of the holes in the sink. Instructions are included.
Date published: 2017-09-09
Is the hot water supposed to be when you pull down towards the sink or when you push back?
I've read that the shorter line is normally for the hot water supply and the cold is the longer of the two, however the longer is labeled for hot on my faucet and the hot water is turned on when you pull down towards the sink with this installation according to the labeling of the supply line and the cold water is when you push back. What is standard on this? Are my lines reversed? Should hot water come on when you push up towards the wall?
On our unit... pushing back towards the wall activates hot water, and pulling forward is cold water. Hope that helps.
Date published: 2017-06-10
How do I remove the quick connect hose assembly?
Thank you for your question, Jan. To remove the hose, squeeze the tabs on the white clip, push up, then pull down.
Best regards,
Jon
Date published: 2019-01-13
how do you remove faucet handle to put thread cover back on. It has fallen inside the handle after a few days of use.
Thank you for your question, Tim. There is a set screw on the bottom of the handle that takes an 1/8" Allen wrench. Simply loosen the set screw, then slide the handle off.
Best regards,
Jon
Date published: 2016-11-23
How can I clean sediment/minerals from spray head?
The aerator does not seem to separate from the valve
look closely at the center circle with the screen in it. The outer ring has 2 flat edges about a quarter inch or so long. you can use pliers or a wrench to come at it head on (tips of the pliers/wrench) to unscrew it for removal/cleaning. the aerator will separate into about 3 pieces. you may need to use a knife or something small to separate the screen head from the aerator/filer by poking it through one of the side slots to push the filter cartridge up.
Date published: 2019-01-13
Reinforcing faucet stability on thin stainless sink
Love this faucet - it looks and works great with plenty of pressure and impressive hose dexterity. We have it mounted on a mediocre-grade stainless steel sink. The sink's back deck flexes forward a bit when I pull out the sprayhead, even with the escutcheon plate and everything tightened. Any recommendation for a stabilizing plate or other reinforcing device, or should I just try to fabricate something? (Figured maybe a strip of 3/4" or 7/8" plywood with three holes through.) Thanks.
Hi Tim, Thank you for your question. We offer the RP37490 stabilization/thin sink aid to help support the faucet when mounted on a thinner sink. This plate should help with your issue.
http://www.deltafaucet.com/repairparts/details/rp37490.html
Thanks,
Dave
Date published: 2016-03-22