Kitchen Single Handle Pull-Down Faucet
only at Lowe's
P88103LF-SSSD-L is rated out of 5 by 128.
List Price*: $272.45
Product Features & Benefits
- CA/VT Compliant
- High-Arc spout provides a large working area
- Pull-down spout for washing or cleaning up
- Matching soap or lotion dispenser included
- Water Efficient Product meeting CALGreen standards
- Low Lead Certified
- Brilliance Finish
- Soap Dispenser
- ADA Compliant
- Handle(s): Single Handle Lever
- With Soap/Lotion Dispenser: Yes
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Pull-out/Pull-down: Yes
- Valve Type: Washerless ball valve
- Installation: 2 or 4-hole 8" installation
- Spout Total Height: 16-1/32
Support, Repair Parts & Technical Specs
Maintenance & Installation Sheet
Parts & Accessories Diagram
Holes for Installation
2 or 4-hole 8" installation
Rated 5 out of 5 by carl from very happy with this product very happy with this product looks, great ,install was fairly easy
Date published: 2018-11-28
Rated 5 out of 5 by Gramdon from Love the ease of use My daughter bought this for me for my birthday, best gift ever!
Date published: 2018-11-26
Rated 5 out of 5 by Ricky from Great looking faucet Happy wife happy life.I stalled the faucet in a hour which included taking the old faucet out.
Date published: 2018-11-19
Rated 5 out of 5 by Gary812 from excellent investment for long term Our peerless faucet has been in service 6 + years. Has been a great purchase with excellent support.
Date published: 2018-10-20
Rated 5 out of 5 by welzee from easy install bought a week ago wife broke the old one tried to buy the same design and found it works a lot better than the old one good stuff to me
Date published: 2018-10-15
Rated 5 out of 5 by Willy from Great Features I bought this 3 years ago, working great Service from peerless faucet company is the Greatest!
Date published: 2018-10-15
Rated 4 out of 5 by Efron from Slim and simply I love the faucet just wish the magnet was a little bit stronger when putting the spout back into the position of the holder.
Date published: 2018-09-20
Rated 5 out of 5 by Richw47 from Great faucet Was very easy to install and works great. Looks like a very expensive faucet.
Date published: 2018-09-20
Does the spray toggle lock or only work when depressed
Dear Gorak, Thank you for your question. The toggle switch on the wand assembly of the Peerless Kitchen Pull-Down P88103LF-SD-L faucet, stay in one function (spray or stream) until the other is selected. Holding the button while in use, is not needed. Best regards, Tanya
Date published: 2018-01-14
installing with handle on the left side of the faucet
can this faucet be installed with the handle on the left side rather than the right as shown in the pictures
Yes, however I recommend you pass on a Peerless product.
Date published: 2017-11-18
Does soap bottle come with faucet,and how do I connect it
Yes it comes with the soap dispenser. It is installed in one of the holes in the sink. Instructions are included.
Date published: 2017-09-09
Is the hot water supposed to be when you pull down towards the sink or when you push back?
I've read that the shorter line is normally for the hot water supply and the cold is the longer of the two, however the longer is labeled for hot on my faucet and the hot water is turned on when you pull down towards the sink with this installation according to the labeling of the supply line and the cold water is when you push back. What is standard on this? Are my lines reversed? Should hot water come on when you push up towards the wall?
On our unit... pushing back towards the wall activates hot water, and pulling forward is cold water. Hope that helps.
Date published: 2017-06-10
How do I remove the quick connect hose assembly?
Thank you for your question, Jan. To remove the hose, squeeze the tabs on the white clip, push up, then pull down. Best regards, Jon
Date published: 2016-12-06
how do you remove faucet handle to put thread cover back on. It has fallen inside the handle after a few days of use.
Thank you for your question, Tim. There is a set screw on the bottom of the handle that takes an 1/8" Allen wrench. Simply loosen the set screw, then slide the handle off. Best regards, Jon
Date published: 2016-11-23
How can I clean sediment/minerals from spray head?
The aerator does not seem to separate from the valve
look closely at the center circle with the screen in it. The outer ring has 2 flat edges about a quarter inch or so long. you can use pliers or a wrench to come at it head on (tips of the pliers/wrench) to unscrew it for removal/cleaning. the aerator will separate into about 3 pieces. you may need to use a knife or something small to separate the screen head from the aerator/filer by poking it through one of the side slots to push the filter cartridge up.
Date published: 2018-02-17
Reinforcing faucet stability on thin stainless sink
Love this faucet - it looks and works great with plenty of pressure and impressive hose dexterity. We have it mounted on a mediocre-grade stainless steel sink. The sink's back deck flexes forward a bit when I pull out the sprayhead, even with the escutcheon plate and everything tightened. Any recommendation for a stabilizing plate or other reinforcing device, or should I just try to fabricate something? (Figured maybe a strip of 3/4" or 7/8" plywood with three holes through.) Thanks.
Hi Tim, Thank you for your question. We offer the RP37490 stabilization/thin sink aid to help support the faucet when mounted on a thinner sink. This plate should help with your issue. http://www.deltafaucet.com/repairparts/details/rp37490.html Thanks, Dave
Date published: 2016-03-22